LFP - Large-Format-Printing
High Quality STeaM fixation was never so affordable!
Thursday 05. May 2011 - First shown at Fespa 2011 (A1/E25) is SETeMas new B-STeaM fixation unit. Although suitable for the fixation of all dyestuff classes the steamer is of typically interest for printshops and designers that like to step into cotton and silk print-fixation. The B-STeaM gives them the reliable and affordable steamer to extend their business.
Owing to the proved technique of its steamers and many years of experience in steamer development, SETeMa was able to meet customer demands for an affordable compact steamer that fit their growing business. The B-STeaM is a professional steamer that can simply be rolled into place through a standard door.
Specific properties: On-board steam generator Low operational and maintenance costs Roll-To-Roll SETeMas own High STeaM re-flow system for exceptional colour brightness One size, one type, no compromise on quality Lowest price in its class.
With temperatures between 100 and 180°C and dwell times from 2 to 30 minutes the B-STeaM is suitable for the fixation of all textile dyes. Typically 100 – 105°C for Reactive and Acid dyes, 165 – 180°C for Disperse dyes and hot-air fixation at 150°C for Pigments.
The B-STeaM is the typical steamer for start-up of a growing business or to extend the printing business with high quality and reproducible fixation results.
The B-STeaM comes in a 2.20 meter width.
With the introduction of the B-STeaM at Fespa, SETeMa now produces 3 different steamer types to offer each customer the steamer that fits their capacity and price.